Product Description:
The CT-233 AC / DC current clamp is an accessory which will allow your multimeter, oscilloscope, transient, X-Y, or X-t recorder to measure electrical current up to 600 amps DC, AC, or even AC on DC, with a frequency response up to 400HZ. When measuring current with this clamp, these is no need to break a circuit or to affect the isolation, and no extra impedance is introduced, making the CT-233 a superb current checking tool.
| Current ranges DC, AC |
|
600A |
| Overload capacity |
|
100% |
| Accuracy DC 0 to 600A |
|
±2% of rdg ±1A |
| Accuracy (45 to 65Hz) |
|
|
| 0 to 100A |
|
±2% of rdg ±0.5A |
| 100 to 300A |
|
±2% of rdg ±1A |
| 300 to 400A |
|
±2% of rdg ±1A |
| 400 to 600A |
|
±2% of rdg ±1A |
| Accuracy (30 to 400Hz) |
|
|
| 0 to 100A |
|
±% of rdg ±0.5A |
| 100 to 300A |
|
±3% of rdg ±1A |
| 300 to 400A |
|
±4% of rdg ±1A |
| 400 to 600A |
|
±6% of rdg |
| Resolution |
|
±100mA |
| Output sensitivity |
|
1mv/A |
| Rated output |
|
0 to 600mV |
| Frequency range |
|
DC to 400Hz |
| Withstand voltage |
|
2000 VAC for one minute |
| General data |
|
|
| Operating temperature |
|
0°C to +50°C 70% humidity |
| Storage temperature (battery removed) |
|
-20°C to +70°C 80% humidity |
| Power supply |
|
9V, Alkaline Battery PP3 |
| Low Battery Indicator |
|
LED stops flashing below (6 ±0.5V) |
| Load impedance (min) |
|
5K ohms |
| Conductor size |
|
45mm |
| Weight |
|
425g typical |
| Output cable |
|
1.5 meters |
| Connectors |
|
4mm plugs |
