Product Description:
Four Channel remote control receiver with four output relays. The output relays can be set to momentary or toggle function. The receiver can be programmed to accept up to 12 remote-control transmitters.
Various output configurations can be used for ON / OFF and Reverse operations.
Programming Additional Remote Control Transmitters
- On the receiver, press <> button momentarily.
- The indicator light will flash.
- Press any button the the Remote Control Transmitter to be programmed.
- The indicator on the receiver will flash 2 times.
To delete ALL Remote Control Transmitter settings from the Receiver.
- On the receiver, press and hold <> button for approximately 8 seconds.
- The indicator light will turn ON, then OFF.
- All data has been removed from the receiver.
Output Relay functions.
- Toggle Operation - JP1 connected, JP2 not connected
- Press one button on the Remote Control Transmitter to set the output relay ON.
- Press the same button on the Remote Control Transmitter to set the output relay OFF.
- Momentary Operation - JP1 not connected, JP2 not connected
- Press one button on the Remote Control Transmitter to set the output relay ON.
- Release the button on the Remote Control Transmitter to set the output relay OFF.
- Inter-lock Operation - JP1 not connected, JP2 connected
- Press one button on the Remote Control Transmitter to set the output relay ON.
- Press another button on the Remote Control Transmitter to set another output relay ON
- The output relay previously ON will now be OFF
- Only one output relay will be ON at any time in this mode.
- On switch ON all output relays will be OFF.
| Receiver Specifications |
|
|
| Operating voltage |
|
DC12V |
| Quiescent condition |
|
Less than 6mA |
| Operating temperature |
|
-40°c to +80°c |
| Receiver sensitivity |
|
-105dBm or better |
| Operating frequency |
|
433MHz |
| Output |
|
Relay Contacts Single Pole Change Over per relay |
| Contact Rating |
|
10A @ 250VAC / 30VDC |
| Dimensions |
|
72 x 52 x 26mm |
| Transmitter Specifications |
|
|
| Operating range |
|
up to 200 meters (depending on obstructions) |
| Operating Voltage |
|
6V [Battery 2 x CR2016] (NOT INCLUDED) |
| Frequency |
|
433MHz |
| Dimensions |
|
58 x 39 x 14mm |
Before using this kit, the remote controls must be paired with the receiver.
