AUTO CHARGE RELAY MAGNET LATCH 500A 12VDC
Product Code: BS7622
Price: €360.87 (Incl Vat)
Product Description:
- Manual control switch provides an added level of safety allowing control with or without power, and offering LOCK OFF capability for servicing
- Includes ML-Series Remote Control Contura Switch PN 2146
- Automatically manages the charging of two large battery banks
- Allows paralleling of battery banks for emergency starting
- 500 Ampere continuous rating to support high-output alternators
- Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for a very short time when changing state
- Dual sensing—senses charge on both battery banks
- Start Isolation (SI)—can be configured for temporary isolation of House loads from the Engine circuit during engine cranking to protect sensitive electronics
- Engine Isolation (EI)—can be configured for isolation of two engines while both are running to protect engine electronics and maximize alternator output
- Senses charging on two battery banks
- LED output to remotely indicate when batteries are combined, isolated, in voltage lockout, or in Start or Engine isolation
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- 7/8" (22mm) stud length accepts multiple cable terminals
- Silver alloy contacts provide high reliability for switching live loads
- Label recesses for circuit identification
| Control Circuit Connection |
|
Tinned Wire |
| Nominal Voltage |
|
12V DC |
| Manual Control |
|
Yes |
| Engine Isolation |
|
Yes |
| Mounting |
|
#10 |
| Start Assist |
|
Yes |
| Start Isolation |
|
Yes |
| Amperage Operating Current |
|
13mA |
| Amperage Operating Current when changing state |
|
<7.0A |
| Continuous Rating |
|
500A |
| Intermittent Rating |
|
700A (5 min) |
| Cranking Rating 10 sec |
|
2500A |
| Cranking Rating 1 min |
|
1100A |
| Cable Size to Meet Ratings |
|
4/0 AWG x 2 |
| Live Current Switching |
|
300A @ 12V DC |
| Switching Cycles |
|
100000 |
| Terminal Ring Diameter Clearance |
|
1.12in (28.45 mm) |
| Terminal Stud Length |
|
1.50in (38.1 mm) |
| Terminal Stud Size |
|
3/8-16 (M10) |
| Terminal Stud Torque |
|
140 in-lb (15.82 Nm) |
| Relay Contact Position |
|
|
| Combine 30 sec |
|
13.5V |
| Combine 90 sec |
|
13.0V |
| Open 10 sec |
|
12.35V |
| Open 30 sec |
|
12.75V |
| Open High |
|
16.2V |
